Skip to main content

Search the Special Collections and Archives Portal

upr000045 25

Image

File
Download upr000045-025.tif (image/tiff; 26.85 MB)

Information

Digital ID

upr000045-025
    Details

    Rights

    This material is made available to facilitate private study, scholarship, or research. It may be protected by copyright, trademark, privacy, publicity rights, or other interests not owned by UNLV. Users are responsible for determining whether permissions are necessary from rights owners for any intended use and for obtaining all required permissions. Acknowledgement of the UNLV University Libraries is requested. For more information, please see the UNLV Special Collections policies on reproduction and use (https://www.library.unlv.edu/speccol/research_and_services/reproductions) or contact us at special.collections@unlv.edu.

    Digital Provenance

    Digitized materials: physical originals can be viewed in Special Collections and Archives reading room

    Publisher

    University of Nevada, Las Vegas. Libraries

    17. Methods of testing wells for underground leakage Mr a number of years the Geological Survey has made investigations of wells where faulty construction has suggested that water confined in the artesian basin may be escaping by means of the wells into other forma­tions above it and in this way may be wasted. For determining leakage in artesian wells a special current meter was designed about 1925. __/ This J McCombs, John, and Fiedler, Albert G., op. cit. meter is placed in the well and lowered to the bottom by means of a con­ductor cable. If the water is flowing in the well the water impinges upon the vanes of a rotor and turns it with a velocity that is propor­tional to the velocity of the water in the well. In the contact chamber at the upper end of the meter shaft an electrical circuit is completed and broken at each revolution of the rotor, and this is heard by means of earphones worn by the observer. The observer notes the frequency of the revolutions and determines the velocity at the point the meter is held during the observation. The velocity of the water corresponding to different rate of rotation of the meter vanes has been determined by calibration tests made at the United States Bureau of Standards. The volume of the leakage is computed from the velocity of the water and the cross-sectional area of the pipe or hole.. Plate 1, A and C, show the equipment used in the Las Vegas investigation.